Vintage Bicycle Brakes on eBay.com
Vintage bicycle brakes were much less sophisticated than braking systems used on bicycles today. Bicycle brakes have come a long way since the vintage systems used on the first bicycles.
Spoon Vintage Bicycle Brakes
Did you know…?
Did you know that when bicycle brakes were first invented, they often could not produce a sufficient braking effect to slow the bicycle down while going downhill?
Riders of Penny Farthings, for example, often had to dismount their bicycle before going down a slope because their spoon brakes were not up to the challenge.
Sometimes, they even had to backpedal to slow down because their brakes were too weak. Aren’t you glad that bicycle brakes have come such a long way since then?
Spoon brakes, also referred to as plunger brakes, were the first braking system used for bicycles. These brakes were used on Penny Farthings (big front wheel, little back wheel) with rubber tires, and they continued to be used until the pneumatic-tired safety bike came into existence.
The spoon brake was usually a pad made of leather that pressed against the front tire, slowing the bicycle down. A hand lever is usually applied to them. Some bicycles during this time had spoon brakes that were applied by using a foot pedal.
Unfortunately, spoon brakes were very sensitive to road and weather conditions, and they created a lot of wear and tear on bicycle tires. The spoon brake was discontinued on adult bicycles around the 1930s and on children’s bicycles around the 1950s.
Duck Vintage Bicycle Brakes
Duck brakes were invented in 1897. They operated using a handlebar lever, which pulled rollers on both sides of the tire to apply friction and slow the tire down. These brakes were made of wood or rubber. These rollers were held away from the tire by springs until the lever was pulled. In addition to the handlebar lever, there was a very long lever behind the handlebars that could be pulled with two hands providing extra braking capabilities.
These brakes provided much quicker stopping power as well as better modulation than spoon brakes of the past. The best, most notable riders used this braking system during this time because it was the most efficient braking system to date.
Rim Vintage Bicycle Brakes
The first rim brake system is what led to modern braking systems used for bicycles today. Rim brakes work by applying friction through brake pads to the rim of a wheel. This slows the tires down, thus slowing down the bicycle.
Brake pads of the past were customarily made of leather, rubber, or cork. They are utilized by using a handlebar lever. Rim brakes are light, cheap, and easy to maintain, but they don’t perform well if the rim of the bicycle is wet, and they can wear rims out quickly.
Last Word about Antique Bicycle Brakes
Although there are so many fantastic braking systems for bicycles today, they all came from the very humble beginnings of the spoon brake, duck brake, and rim braking systems. These systems were innovative for their time and were quite technologically advanced, considering how new bicycles were at the time.
If you choose to ride a vintage bicycle with its original brakes, use caution. These braking systems aren’t nearly as safe as bicycle braking systems today, and they don’t stop as efficiently, or as effectively as bicycle brakes you’re probably used to.
Bill Cosby